The power must be turned off and the inlet valve closed. At the same time, you can inspect the impeller. At the bottom of the front panel, there is a small socket where the filter is located. It is unscrewed counterclockwise. Hair and threads on the impeller are removed manually.
Washing mode switch
If two LEDs start to light up simultaneously on the panel during the washing mode or the machine stops without finishing the cycle and drains the water, then there are problems with switching modes. The error code F08 may appear on the electronic display. In this case, we are talking about the sticking of the heating element relay. Another reason is the pressure switch, which freezes in the filling mode. To deal with the error, it is necessary to carry out a small diagnosis and inspect:
the board, namely the contacts to the J3 connector;
check the pressure switch with a multimeter;
the wiring that goes from J3 to the pressure switch.
Most often, replacing the heating element, board or pressure canada telegram data switch allows you to fix the breakdown. You can replace the heating element yourself, without resorting to the help of a specialist, since it is easy to access. To do this, you will need to remove the panel at the back. It, in turn, is attached with several bolts. Experts advise checking the heating element before replacing it. A megohmmeter is used for this. One end of the probe is attached to the terminal on it, and the other to its body. If at least some value appears on the device, it means that it is broken.
Drum bearings
Among the disadvantages of Indesit equipment, one can single out a small tank. This feature often becomes the main reason why bearings in such washing machines quickly fail. It is impossible to disassemble the unit on your own, the tank is sealed. Experts advise contacting experienced repairmen who will completely replace it.