The microwave oven body is covered in burnout

[shapanwwuom]

All dirty places should be thoroughly cleaned and wiped dry. The plate itself is replaced if necessary. But often during the first inspection and repair it is enough to turn it over to the other side, having previously cleaned it from dirt. The new part is easily cut out from the old measurement of the same material. It can be found in any hardware store.

The main layer of dirt accumulates in the bottom, where burnt food particles settle. The resulting gap forms a place for the appearance of a radiation siphon. The burnout is cleaned and connected mechanically.After this, microscopic cracks may remain, which, however, should not exceed the size of the holes in the grid. In this case, complete blocking of microwave radiation through the door will be carried out.

Note! You can get out of the situation by soldering the gap in the body itself. To do this, take a brass mesh and make a cover from it. In order to remove traces of repair work, you need to rub the paint with compounds netherlands telegram data that are harmless to heat. If dirt accumulates on the wall, remove it with sandpaper for metal. After that, paint to the original state.

The pallet rotates intermittently or stops completely
In this case, it is necessary to get the electric motor, which is located at the bottom of the case. It is fastened with a screw through a rubber seal. In order to pull it out, you need to remove the cover located at the bottom of the case. The removed motor and all applied kinematics are inspected, cleaned of dirt and lubricated with oil.

A coupler must be secured on top of the shaft, which is made of plastic.It transmits the shaft torque from the engine to the platform part, which accompanies the working surface. The movement is performed in a circle of the recess of the body part. Three wheels provide rotation. If the engine windings are intact, such a sequence of actions is quite sufficient. If the windings are too worn, then all accompanying parts should be replaced.