During operation, the road roller should be turned on before vibration, and the internal combustion should be at medium speed first, and then switched to high speed.
Before changing speed and turning, stop the car first, and then reduce the internal combustion speed when changing speed.
It is strictly forbidden to turn on the roller vibration on a hard surface.
When compacting soft road surfaces, compact them 1-2 times without vibration, then turn on vibration and compact.
The vibration frequency should be kept constant during compaction. For adjustable vibration rollers, the vibration frequency should be adjusted before starting work, and the vibration frequency should not be adjusted without vibration.
Adjustment of the reverse gear, clutch and brake should be made after disengaging the main clutch.
When moving up or down, the fast gear cannot be used. When making sharp turns, including situations where the articulated vibration roller moves in a tight turn, the fast gear must not be used.
The roller should not vibrate when moving at high speed.
When stopping, first stop the vibration, then egypt number data switch the reverse gear to the middle position, switch the gearbox to neutral, and finally raise the handbrake and turn off the internal combustion engine after standing for several minutes.
5. Cleaning, storage and transportation of the roller
Cleaning the roller
After each operation, it is necessary to wash away dirt and dust. In this case, special attention should be paid to cleaning the diesel engine, generator, starter, fuel pump, nozzle, hydraulic pump, etc. Wipe these places with a dry and soft cloth.