Page 1 of 1

4 Volts required to power the cathode heating circuit;

Posted: Sun Feb 16, 2025 10:11 am
by shapanwwuom
When carrying out repairs, it is necessary to exclude the incorrect position of the cover. It is forbidden to remove it from the case and artificially close the contacts of the door microswitches. Sometimes, such a test is carried out in order to check the correct passage of current through them. This is a fundamentally wrong approach, since microwave radiation will inevitably enter the external environment. In this situation, you can not only receive a significant dose of radiation, but also burn your eyeball or even lose your sight.

If there is no microwave radiation detector in the house, the test indonesia telegram data can be carried out using any mobile device. To do this, place it in the internal box of the electrical appliance and close the door tightly. Call this mobile phone from the second phone. If the signal is not received, the radiation is reliably recorded by the screening grid, and there is no danger of its spreading beyond the internal body of the oven.

Threat Two. Repair Risks: 2 Types of High Power Voltage
The magnetron is an electronic bulb assembled according to a diode circuit. It is capable of easily and freely passing electric current only in one direction due to the principles of thermionic emission. The magnetron is powered by the output windings of the transformer. It, in turn, is connected to the network by a special controlled circuit. The secondary coils included in its composition transform:

2000 Volts, transformed into a voltage multiplier, which is collected on a diode and a capacitor.
The heating circuits are fastened with a fairly thick drive. This size is necessary to ensure strength to withstand the regularly incoming load of up to 10 Amperes. The high-voltage coil and the wires connected to it have high-power dielectric characteristics